Haydon Kerk Pittman (AMETEK, USA) can-stack rotary steppers are permanent-magnet can-type micro steppers: Z20000 Ø20 mm, 15° step, 0.46 Ncm (0.65 oz-in) holding / 0.12 Ncm detent; Z26000 Ø25.4 mm, 7.5°/15° step, 1.27 Ncm (1.8 oz-in) holding / 0.18 Ncm detent; ball or sleeve bearing versions suit gauge pointers, small valves and micro robot joints in low-cost open-loop positioning.
Haydon Kerk Pittman (AMETEK, USA) hybrid rotary stepper motors are OEM-grade hybrid steppers in Size 8-23 (21000-57000 series, SS single/DS double stack, 0.9° step options) with 0.015-1.483 Nm (2.1-210 oz-in) holding torque; same platform as their linear actuators and stackable with gearboxes/screws into integrated motion modules for robot joints, rotary tables and precision feed axes.
Haydon Kerk Pittman (AMETEK, USA) hybrid stepper linear actuators drive a stainless modified-ACME screw/rotor nut directly, covering Size 6-34 in 12 series (16000-87000 incl. DS double-stack) with 1.5-127 µm travel per step, 2-2224 N max force, 12.7-63.5 mm captive stroke and up to 500 mm non-captive/external; reduced drivetrain parts suit semiconductor tools, medical instruments and robot Z-axis precision motion.
Haydon Kerk Pittman (AMETEK, USA) can-stack linear actuators span Ø15-37 mm in six series (15000/Z20000/G4 19000/Z26000/G4 25000/G4 37000) with 3-100 µm travel per step, 7-260 N max force and strokes of 12.7-38.1 mm captive or up to 150 mm non-captive/external; captive, non-captive and external-drive screw formats suit optical focusing, microfluidic pumps and small robot end effectors.
Haydon Kerk Pittman (AMETEK, USA) Size 17 Slim is a NEMA-17 hybrid linear actuator with integrated IDEA intelligent drive: 1.8° step angle, 2.6 A/phase, 13.2 W, 352 g total, 12-42 VDC supply and 0.003-0.0487 mm travel per step across lead options; the drive-integrated design cuts wiring and commissioning for optical focusing, micro-pumping and compact Z-axis precision positioning.
Haydon Kerk Pittman (AMETEK, USA) DC040B is a high-power-density Ø40 mm brushed DC motor in six windings: max terminal voltage 48 V, mechanical speed to 7,000-8,000 rpm, continuous stall torque 0.017-0.081 Nm (2.4-12 oz-in), peak torque 0.086-0.50 Nm (12-71 oz-in) at only 200-440 g; rare-earth magnets and ball bearings suit battery-powered mobile robots, pumps and actuators, and it stacks with G30A/G51A gearboxes as a gearmotor.
Tolomatic (USA) BCS is a rodless screw electric actuator in three body sizes BCS10/15/20: max load 272 kg (600 lbf), strokes to 3.4 m (120 in) and speeds to 1.5 m/s (60 in/s) with Acme or ball screw drive options and an auxiliary carrier for higher load and moment capacity; the sealed design does not collect particulate like exposed ball bearing systems, fitting transfer, stacking and pick-and-place over long travel.
Tolomatic (USA) GSA is a high-thrust guided-rod electric linear actuator in four frames GSA12/16/24/32: max force 580-18,500 N (130-4,160 lbf), max load 182-544 kg (400-1,200 lbs), speed to 3,124 mm/s (123 in/s) and strokes 457-914 mm (18-36 in); the guided-rod anti-rotation design is stiff against side loads for pressing, clamping, lifting and pushing in automation and robot test rigs.
Tolomatic (USA) MXE-S is Tolomatic's most advanced screw-driven electric linear actuator series in six frames MXE16S-63S: max force 200-19,127 N (45-4,300 lbf), max load 16-236 kg (up to 472 kg with auxiliary carrier), speed to 1,524 mm/s and strokes to 3,404 mm (134 in); Solid Bearing (S) or Profiled Rail (P) carriers with Acme or ball screw drives for transfer, pick-and-place, clamping and mid/long-stroke linear axes.
Haydon Kerk Pittman (AMETEK, USA) Pittman ES/EC brushless DC motors span 30-121 mm frames: 0.025-6.5 Nm continuous torque, 9-2,000 W rated power, speeds to 15,000 RPM and bus voltages to 325 Vdc; high power density and low cogging suit robot rotary joints, AGVs, medical and lab automation, and they combine with Kerk screws for linear actuators or PLG planetary gearboxes for joint modules.
Tolomatic (USA) RSH hygienic rod-style electric actuators use 316 stainless steel bodies with IP69K protection for high-pressure, high-temperature washdown; sizes RSH22/25/30 deliver 7.6-35.3 kN (1,700-7,943 lbf) max force, strokes to 1,219 mm (48 in) and speeds to 498 mm/s (19.6 in/s) for food, beverage, pharma and any wet or clean linear-joint application.
Tolomatic (USA) B3S is a ball-screw-driven rodless electric actuator family in three sizes B3S10/15/20: max force 1.8-12.0 kN (410-2,700 lbf), max load 268-911 kg, speed to 1,524 mm/s (60 in/s) and strokes to 3,454 mm (136 in); the rodless design is compact with long travel and high stiffness for transfer, pick-and-place, clamping and long-stroke linear axes in automation and humanoid lines.
