Skip to content
← Back to Components

Hokuyo UTM-30LX-EW 2D Scanning Laser Range Finder

Vendor: Hokuyo Automatic (Japan)

Product: UTM-30LX-EW 2D

Hokuyo UTM-30LX-EW 2D Scanning Laser Range Finder

Hokuyo Automatic (Osaka, Japan, est. 1971) is a leading maker of photoelectric sensors and 2D LiDAR. The UTM-30LX-EW is its flagship long-range 2D scanning laser range finder: 905 nm Class 1 laser diode, 270° scan field, 0.25° angular resolution (360°/1440 steps), 25 ms per scan (40 Hz); guaranteed range 0.1-30 m (60 m max), accuracy ±30 mm (0.1-10 m) / ±50 mm (10-30 m), 1 mm measurement resolution; Ethernet 100BASE-TX with SCIP2.2 protocol and wireless configuration; 12 VDC ±10% supply at <8 W; IP67 optics, -10 to +50 °C operation; 62×62×87.5 mm and only 210 g. Widely used for AGV/AMR navigation, obstacle avoidance, mapping and area monitoring.

Laser905 nm semiconductor laser, Class 1
Weight210 g (without cable)
Accuracy±30 mm (0.1–10 m), ±50 mm (10–30 m)
InterfaceEthernet 100BASE-TX (auto-negotiation), SCIP2.2
Dimensions62×62×87.5 mm
Scan Angle270°
Scan Speed25 ms/scan (40 Hz, motor 2400 rpm)
Operating Temp-10 to +50 °C
Supply Voltage12 VDC ±10%
Detection Range0.1–30 m guaranteed (60 m max)
Power Consumption<8 W (max 1 A, normal 0.7 A)
Angular Resolution0.25° (360°/1440)
Ingress ProtectionIP67 (optics)
Measurement Resolution1 mm

Related Components

Ouster OS1 Max Rev8 256-Channel Long-Range High-Resolution Imaging Lidar

Ouster OS1 Max Rev8 256-Channel Long-Range High-Resolution Imaging Lidar

The Ouster OS1 Max is the flagship long-range imaging lidar of the Rev8 OS series and the first to reach 256 vertical channels (also 64/128): 865 nm Class 1 eye-safe laser, 360 deg x 43.9 deg FOV, 512-4096 horizontal columns, 5-40 Hz configurable rotation. In 1024 @ 10 Hz mode it reaches 350 m on 80% Lambertian targets and 200 m on 10% targets (both >90% detection probability at 100 klx sunlight), with 500 m max representable and 0 m minimum range; range accuracy is +/-1.25 cm (Lambertian) / +/-2.5 cm (retroreflective) at 0.1 cm resolution, up to 2 returns and 10,485,760 points per second. Native RGB-D color point cloud (116 dB dynamic range) carries RGB, range, signal, reflectivity, NIR, channel, azimuth and timestamp per point; a synchronous IMU runs at 640/1280/2560 Hz. Data leaves over gigabit Ethernet UDP with PTP/gPTP/NMEA/PPS time sync (<1 ms error) and <10 ms latency. It runs from 12/24 VDC (9-58 V) at 15-25 W (19 W nominal, 28 W peak starting at -40 C), measures 87 mm diameter x 82 mm and weighs 670 g (720 g with halo cap); IP68/IP69K, -40 to +85 C, 100 g shock and 10 Grms vibration. Engineered for functional safety (ASIL-B, SIL-2, PLd) with an on-sensor 3D Zone Monitor and designed for cybersecurity to ISO 21434 / UNECE WP.29 / IEC 62443 / ISO 27001. Built for long-range industrial sensing, off-highway vehicles, autonomous cars, trucks and buses, traffic and security monitoring, and 3D mapping vehicles.

LiDAROuster
Bothlent XFM-10X21-MINI Acoustic Noise Reduction Module

Bothlent XFM-10X21-MINI Acoustic Noise Reduction Module

The XFM-10X21-MINI is a standardized acoustic noise-reduction hardware module from Bothlent for AI robots, smart cockpits, ATMs, hospital queue terminals, and other AIoT devices. It combines environmental noise removal, echo cancellation, VoIP call noise reduction, microphone-array wake-up, sound-source localization, and super-directional pickup with voice-separation and sound-classification algorithms. Beyond speech processing, it distinguishes natural sounds such as thunder, birds, and animals from specific human sounds such as snoring and coughing, making it suitable for noise-pollution control, smart security, and home health-monitoring devices. The vendor page does not disclose the microphone-array count, pickup range, interface, or electrical specifications.

Acoustic Noise Reduction ModuleVoice Separation
Bothlent RDM-Lite-X2 Android Board for Voice and Video Large Models

Bothlent RDM-Lite-X2 Android Board for Voice and Video Large Models

RDM-Lite-X2 is a Bothlent Android board designed for voice and video large-model integration in AI robots, intelligent voice terminals, and industrial IoT devices. Its microphone array and on-device acoustic algorithms support 1-5 m interaction, 180- or 360-degree sound-source localization, directional pickup, environmental sound classification, multi-speaker separation, and 0.3-second wake-up. The board connects to Doubao, Coze, Qwen, Tencent Hunyuan, and MiniMax and supports Android application development and integration.

Android BoardVoice and Video Models
Bothlent RDM-Lite-X1 AI Voice Interaction Module

Bothlent RDM-Lite-X1 AI Voice Interaction Module

RDM-Lite-X1 combines a sound card and Android mainboard in one voice-interaction module for AI robots, intelligent voice terminals, and industrial IoT systems. It uses a microphone array and a 6 TOPS NPU to support 1-5 m interaction, 180- or 360-degree sound-source localization, directional pickup, environmental sound classification, multi-speaker separation, and 0.3-second wake-up. It connects to Doubao, Coze, Qwen, Tencent Hunyuan, and MiniMax, supports secondary Android application development, and adds visual detection to acoustic processing through the AVSS multimodal approach.

AI Voice ModuleSound Source Localization

As an Amazon Associate, we earn from qualifying purchases.