#Carbon steel (8)

Waterfall Pagination

Low Profile Support Rail for 5/8" Shafts - LSR10PD-012.000-SL Carbon Steel Length: 12" Pre-Drilled

Pre-drilled low profile support rail, 12 in, for 5/8 in shafts; AISI C-1018 steel, 40% lower profile.

COMPONENT

Support railsPre-drilledLow-profileCarbon steel

Low Profile Support Rail for 1/2" Shafts - LSR08-012.000-SL Carbon Steel Length: 12"

Low profile steel support rail, 12 in, for 1/2 in shafts; 40% lower profile, AISI C-1018 steel.

COMPONENT

Support railsLow-profileCarbon steelUndrilled

Linear Guide Carriage - Redi-Rail RRS30A-5 w/ 5 Steel Roller Bearings - Width: 30mm

Redi-Rail carriage for 30 mm RR30 rails with 5 double-row carbon steel rollers, adjustable preload.

COMPONENT

CarriagesRedi-RailCarbon steelRoller

V-Rail Linear Rail - V-Guide VR1-024 for Size 1 V-Wheels - Length: 24" Carbon Steel

V-groove linear rail, 24" long, induction-hardened 1045 carbon steel, ground and polished, undrilled solid; matches Size 1 (20mm) V-wheels; approx. 0.36 lbs.

COMPONENT

V-Shape Guide RailV-GuideCarbon steelInduction Hardening

Carbon Steel Linear Shaft on Low Profile Rail LSRA08-012.000-SL Diameter: 1/2" Length: 12"

1/2 Inch Diameter Carbon steel linear shaft, precision case hardened and ground, fused to a low profile AISI C-1018 Steel Linear Support Rail. This Low Profile Linear Support Rail Assembly (LSRA) is 40% lower than regular assemblies. Length: 12" Not Drilled If standard mounting holes are required on the support rail, specify this via Configure CAD & Quote below using the part number LSR-12-PD which will get you standard industry hole spacing (you can also submit drawings for

COMPONENT

Shaft-and-rail assembliesLow-profileSurface hardeningCarbon steel

Linear Shaft on Rail - Carbon Steel SRAM12-0360-SL Diameter: 12mm Length: 360mm

Linear Shaft made of 1060 Carbon Steel and of 12mm diameter, 360mm length with RC 60 Hardness™, fused onto an aluminum alloy linear rail, designed for open bearing variants of Simplicity® self-lubricating plain linear bearings, ball bearings, or roller bearings.

COMPONENT

Linear shaftsRailway ComponentCarbon steelRC60 Hardness

Linear Shaft - Pre-Drilled Steel NIPDL08-004.000-SL Diameter: 1/2" Length: 4"

Pre-Drilled Linear Shaft made of 1060 Carbon Steel with a 1/2" diameter and 4" length, rated Class L to represent the highest Precision Tolerance and Standards Compliance. Made in the USA by PBC Linear® as RC 60 Plus™ case-hardened steel, the shaft is pre-drilled with industry standard 4 inch spacing beginning 2 inches from the end. Click "Configure and Quote" below to order custom lengths and end-tapping.

COMPONENT

Linear shaftsPre-drilledCarbon steelSurface hardening

Linear Shaft - 1060 Carbon Steel - NIM04-0150-SL Diameter: 4mm Length: 150mm

Linear Shaft of hardened carbon steel, 4mm diameter, 150mm length, made in the USA by PBC Linear® as Simplicity® 60 Plus steel. Featuring an optimized surface finish that enhances the performance of linear bearings such as self-lubricating plain bearings, ball bearings, roller bearing pillow blocks, and guide carriages. Solid, not pre-drilled. Neither drilled nor tapped - pre-drilled shafts are NIPDM (metric) or NIPDL (inch) Order custom lengths, tapping and hole spacing via

COMPONENT

Linear Light ShaftCarbon steelGuiding ShaftPrecision