Skip to content
Agientry
← Tags

#Shaft-and-rail assemblies (3)

WaterfallPagination
Linear Shaft on a Rail - Ceramic Coated Aluminum CCR08-012.000-SL Diameter: 1/2" Length: 12"

Linear Shaft on a Rail - Ceramic Coated Aluminum CCR08-012.000-SL Diameter: 1/2" Length: 12"

Linear rail and 1/2" diameter shaft, 12" in length, made from a single piece of feather-weight ceramic-coated aluminum. This one-piece gliding surface assembly is designed for self-lubricating Simplicity® linear bearings with FrelonGOLD® liners, which perform exceptionally in extreme conditions like dirt, heat, and vibration.

COMPONENT

Shaft-and-rail assembliesIntegral MoldingCeramic coatingsLightweight
Plain Linear Bearing Guide RPS-0800-024-000 Two Steel Shafts on Rails - Diameters: 1/2" Lengths: 24"

Plain Linear Bearing Guide RPS-0800-024-000 Two Steel Shafts on Rails - Diameters: 1/2" Lengths: 24"

Plain linear bearing guide with two 1/2" steel shafts mounted on support rails, 24" long. Pre-assembled twin-shaft guidance for Simplicity plain bearings; 1.5" wide, 1.38" high, approx. 12 lbs.

COMPONENT

Shaft-and-rail assembliesDual AxisPlain bearingsPre-assembly
Carbon Steel Linear Shaft on Low Profile Rail LSRA08-012.000-SL Diameter: 1/2" Length: 12"

Carbon Steel Linear Shaft on Low Profile Rail LSRA08-012.000-SL Diameter: 1/2" Length: 12"

1/2 Inch Diameter Carbon steel linear shaft, precision case hardened and ground, fused to a low profile AISI C-1018 Steel Linear Support Rail. This Low Profile Linear Support Rail Assembly (LSRA) is 40% lower than regular assemblies. Length: 12" Not Drilled If standard mounting holes are required on the support rail, specify this via Configure CAD & Quote below using the part number LSR-12-PD which will get you standard industry hole spacing (you can also submit drawings for

COMPONENT

Shaft-and-rail assembliesLow-profileSurface hardeningCarbon steel