Double plain linear bearing, 12 mm ID, square flange, compensated clearance; up to 8 m/s, -240 to 204 °C, 3.24 in long, approx. 0.13 lbs.
Double plain linear bearing, 1/2 in ID, square flanged end mount; self-lubricating up to 8 m/s, -240 to 204 °C, approx. 0.32 lbs.
Double die-set plain linear bearing, 1.00 in compensated ID, steel shell with round center flange; -240 to 204 °C, 1.56 x 2.24 x 1.56 in, approx. 1.78 lbs.
Redi-Rail stainless steel rod-type linear guide rail, 30 mm wide x 250 mm long, 1.18 in high, corrosion-resistant, approx. 0.49 lbs.
Open-type linear ball bearing, 12 mm JIS metric bore, 0.83 x 1.18 x 0.73 in envelope, -20 to +80 °C, approx. 0.07 lbs.
Heavy-duty steel U-channel linear rail, 1000 mm long x 65 mm wide, 18MnNb6 ferritic steel (yield 430 N/mm², tensile 550-770 N/mm², HB 160-210), mates with HVB-053 / HVBEA-453 rollers.
Pre-drilled stainless steel linear shaft, 1-1/4 in (31.75 mm) diameter x 12 in (304.8 mm) long, length tolerance ±0.03 in, approx. 4.26 lbs.
Miniature ball-screw linear actuator: 6 mm screw, 1 mm lead, 150 mm travel, cylindrical nut with standard no-preload, static axial load 2.144 kN, NEMA 11 motor interface.
Miniature ball-screw linear actuator: 6 mm screw, 1 mm lead, 250 mm travel, cylindrical nut, NEMA 11 (23 mm) motor interface, 0.05 mm standard backlash, approx. 1 lbs.
Belt-driven linear actuator, 1000 mm body with 55 x 55 mm profile, dual ball profile rail guidance, steel-reinforced timing belt and 12 mm left female drive shaft; approx. 16.14 lbs.
Steel linear guide rail, 28 mm wide, 250 mm long, 12.25 mm high, U-shaped ground body with pre-drilled mounting holes every 80 mm; mates with SRS28C carriages.
16 mm x 300 mm shaft-rail assembly, RC60-hardened 1060 carbon steel shaft fused to an aluminum rail for open Simplicity bearings; approx. 1.76 lbs.
